# Makefile for Medication Reminder App
# Consolidated version with grouped targets and reduced redundancy

.PHONY: help install clean dev build test lint docker k8s

# Default target
.DEFAULT_GOAL := help

# Colors for output
BLUE := \033[34m
GREEN := \033[32m
YELLOW := \033[33m
RED := \033[31m
RESET := \033[0m

##@ General

help: ## Display this help message
	@printf "$(BLUE)Medication Reminder App - Available Commands$(RESET)\n"
	@printf "\n"
	@awk 'BEGIN {FS = ":.*##"} /^[a-zA-Z_0-9-]+:.*?##/ { printf "  $(GREEN)%-20s$(RESET) %s\n", $$1, $$2 } /^##@/ { printf "\n$(YELLOW)%s$(RESET)\n", substr($$0, 5) } ' $(MAKEFILE_LIST)

install: ## Install dependencies
	@printf "$(BLUE)Installing dependencies...$(RESET)\n"
	@bun install

clean: ## Clean build artifacts and dependencies
	@printf "$(BLUE)Cleaning up...$(RESET)\n"
	@rm -rf node_modules dist build .cache

reset: clean install ## Reset project (clean and reinstall)
	@printf "$(GREEN)Project reset completed!$(RESET)\n"

##@ Development

dev: ## Start development server
	@printf "$(BLUE)Starting development server...$(RESET)\n"
	@bun run dev

build: ## Build the application
	@printf "$(BLUE)Building application...$(RESET)\n"
	@bun run build

preview: ## Preview the built application
	@printf "$(BLUE)Starting preview server...$(RESET)\n"
	@bun run preview

setup: ## Setup the project
	@printf "$(BLUE)Setting up project...$(RESET)\n"
	@bun run setup

##@ Testing & Quality

test: ## Run unit tests
	@printf "$(BLUE)Running unit tests...$(RESET)\n"
	@bun run test

test-watch: ## Run unit tests in watch mode
	@printf "$(BLUE)Running tests in watch mode...$(RESET)\n"
	@bun run test:watch

test-coverage: ## Run tests with coverage
	@printf "$(BLUE)Running tests with coverage...$(RESET)\n"
	@bun run test:coverage

test-integration: ## Run integration tests
	@printf "$(BLUE)Running integration tests...$(RESET)\n"
	@bun run test:integration

test-e2e: ## Run end-to-end tests
	@printf "$(BLUE)Running e2e tests...$(RESET)\n"
	@bun run test:e2e

test-e2e-ui: ## Run e2e tests with interactive UI
	@printf "$(BLUE)Running e2e tests with UI...$(RESET)\n"
	@bun run test:e2e:ui

test-auth-debug: ## Run authentication debug tests
	@printf "$(BLUE)Running authentication debug tests...$(RESET)\n"
	@bunx playwright test --config=tests/e2e/playwright.auth.config.ts

test-auth-debug-ui: ## Run authentication debug tests with UI
	@printf "$(BLUE)Running authentication debug tests with UI...$(RESET)\n"
	@bunx playwright test --config=tests/e2e/playwright.auth.config.ts --ui

test-all: ## Run all tests (unit + integration + e2e)
	@printf "$(BLUE)Running all tests...$(RESET)\n"
	@bun run test:all

lint: ## Run linting and fix issues
	@printf "$(BLUE)Running linting checks...$(RESET)\n"
	@bun run lint
	@bun run lint:fix 2>/dev/null || true

pre-commit: ## Run pre-commit checks
	@printf "$(BLUE)Running pre-commit checks...$(RESET)\n"
	@bun run pre-commit

check: lint test-all ## Run complete quality check (lint + all tests)
	@printf "$(GREEN)Quality check completed!$(RESET)\n"

##@ Docker

docker-build: ## Build Docker images (local and multi-platform)
	@printf "$(BLUE)Building Docker images...$(RESET)\n"
	@bun run docker:build-local
	@bun run docker:build 2>/dev/null || true

docker-down: ## Stop and remove Docker containers
	@printf "$(BLUE)Stopping Docker containers...$(RESET)\n"
	@if docker-compose -f docker/docker-compose.yaml ps --services 2>/dev/null | grep -q .; then \
		docker-compose -f docker/docker-compose.yaml down; \
		printf "$(GREEN)Docker containers stopped$(RESET)\n"; \
	else \
		printf "$(YELLOW)No containers running$(RESET)\n"; \
	fi

docker-clean: docker-down ## Stop containers and clean up volumes/images
	@printf "$(BLUE)Cleaning Docker resources...$(RESET)\n"
	@docker-compose -f docker/docker-compose.yaml down --volumes --remove-orphans 2>/dev/null || true
	@docker image prune -f --filter "until=24h" 2>/dev/null || true
	@docker volume prune -f 2>/dev/null || true

##@ Kubernetes Deployment

deploy-dev: ## Deploy to development environment
	@printf "$(BLUE)Deploying to development...$(RESET)\n"
	@kubectl apply -k k8s-kustomize/overlays/dev

deploy-prod: ## Deploy to production environment
	@printf "$(BLUE)Deploying to production...$(RESET)\n"
	@kubectl apply -k k8s-kustomize/overlays/prod

undeploy-dev: ## Remove development deployment
	@printf "$(BLUE)Removing development deployment...$(RESET)\n"
	@kubectl delete -k k8s-kustomize/overlays/dev --ignore-not-found=true

undeploy-prod: ## Remove production deployment
	@printf "$(BLUE)Removing production deployment...$(RESET)\n"
	@kubectl delete -k k8s-kustomize/overlays/prod --ignore-not-found=true

status-dev: ## Show development deployment status
	@printf "$(BLUE)Development status...$(RESET)\n"
	@kubectl get all -n rxminder-dev -l app=rxminder 2>/dev/null || printf "$(YELLOW)No development deployment found$(RESET)\n"

status-prod: ## Show production deployment status
	@printf "$(BLUE)Production status...$(RESET)\n"
	@kubectl get all -n rxminder-prod -l app=rxminder 2>/dev/null || printf "$(YELLOW)No production deployment found$(RESET)\n"

diff-dev: ## Show changes for development deployment
	@printf "$(BLUE)Development diff...$(RESET)\n"
	@kubectl diff -k k8s-kustomize/overlays/dev 2>/dev/null || true

diff-prod: ## Show changes for production deployment
	@printf "$(BLUE)Production diff...$(RESET)\n"
	@kubectl diff -k k8s-kustomize/overlays/prod 2>/dev/null || true

validate-k8s: ## Validate Kubernetes configurations
	@printf "$(BLUE)Validating Kubernetes configs...$(RESET)\n"
	@kubectl kustomize k8s-kustomize/overlays/dev | kubectl apply --dry-run=client --validate=true -f - >/dev/null
	@kubectl kustomize k8s-kustomize/overlays/prod | kubectl apply --dry-run=client --validate=true -f - >/dev/null
	@printf "$(GREEN)Kubernetes validation passed!$(RESET)\n"

##@ Configuration

generate-config: ## Generate configuration for all environments using unified config
	@printf "$(BLUE)Generating unified configurations...$(RESET)\n"
	@bun scripts/generate-unified-config.ts --all
	@printf "$(GREEN)Unified configurations generated!$(RESET)\n"

generate-config-dev: ## Generate configuration for development environment
	@printf "$(BLUE)Generating development configuration...$(RESET)\n"
	@bun scripts/generate-unified-config.ts development
	@printf "$(GREEN)Development configuration generated!$(RESET)\n"

generate-config-staging: ## Generate configuration for staging environment
	@printf "$(BLUE)Generating staging configuration...$(RESET)\n"
	@bun scripts/generate-unified-config.ts staging
	@printf "$(GREEN)Staging configuration generated!$(RESET)\n"

generate-config-prod: ## Generate configuration for production environment
	@printf "$(BLUE)Generating production configuration...$(RESET)\n"
	@bun scripts/generate-unified-config.ts production
	@printf "$(GREEN)Production configuration generated!$(RESET)\n"

validate-config: ## Validate unified configuration
	@printf "$(BLUE)Validating unified configuration...$(RESET)\n"
	@bun scripts/generate-unified-config.ts --dry-run
	@printf "$(GREEN)Configuration validation completed!$(RESET)\n"

config-debug: ## Show current unified configuration (debug mode)
	@printf "$(BLUE)Current unified configuration:$(RESET)\n"
	@bun -e "import { logConfig } from './config/unified.config.ts'; logConfig();"

##@ Workflows

start: dev ## Alias for dev (start development server)

build-test: build test ## Build and run unit tests
	@printf "$(GREEN)Build and test completed!$(RESET)\n"

deploy-dev-quick: build deploy-dev ## Build and deploy to development
	@printf "$(GREEN)Quick development deployment completed!$(RESET)\n"

deploy-prod-quick: build deploy-prod ## Build and deploy to production
	@printf "$(GREEN)Quick production deployment completed!$(RESET)\n"

undeploy-all: undeploy-dev undeploy-prod docker-clean ## Remove all deployments and clean Docker
	@printf "$(GREEN)Complete cleanup completed!$(RESET)\n"

ci-check: check validate-k8s ## Complete CI/CD validation pipeline
	@printf "$(GREEN)CI/CD checks passed!$(RESET)\n"

##@ Legacy Support (Deprecated)

k8s-deploy: ## [DEPRECATED] Use deploy-dev instead
	@printf "$(YELLOW)Warning: k8s-deploy is deprecated. Use 'make deploy-dev' instead.$(RESET)\n"
	@$(MAKE) deploy-dev

k8s-undeploy: ## [DEPRECATED] Use undeploy-dev instead
	@printf "$(YELLOW)Warning: k8s-undeploy is deprecated. Use 'make undeploy-dev' instead.$(RESET)\n"
	@$(MAKE) undeploy-dev

deploy: ## [DEPRECATED] Use deploy-dev or deploy-prod instead
	@printf "$(YELLOW)Warning: deploy is deprecated. Use 'make deploy-dev' or 'make deploy-prod' instead.$(RESET)\n"
	@$(MAKE) deploy-dev

undeploy: ## [DEPRECATED] Use undeploy-dev, undeploy-prod, or undeploy-all instead
	@printf "$(YELLOW)Warning: undeploy is deprecated. Use 'make undeploy-all' instead.$(RESET)\n"
	@$(MAKE) undeploy-all